Check back regularly or subscribe for updates. Email us at jandkaudiodesign@gmail.com, or fill in the form on the left.

Friday, December 20, 2013

Transformers Design



Transformers Design

Our transformers designs are inherited from many years of winding experience, from dismantling + repairing many famous transformers, and evolved and exceed the quality of the older designs. We combine theory, real life experience, true measurements, real user preference and design excellence together to get to the quality now. 

2A3 and 300B tubes are two of the hottest or most commonly used tubes in the DIY and OEM world. Our gurus have designed and built countless versions of such transformers designs and now those designs are among the best of the bests, tested and proven. 

Some will blame the transformers designs when it does not sound good. Well, transformer design plays a crucial role in the sound but circuit and mechanical designs play critical roles too. Two guys can use the exact same components to build an amplifier but the end results are worlds apart. Amplifiers building are art, nobody can disagree with that. Everybody can build them just that whether they sound good or not, is another story.  

For some OEMs (not all), the designs have gone through so many variations to end up with final design that is to be marketed. Imagine how much alterations are involved, not to mention the time and human resources involved to fine tune all the components to arrive at that single converged point. So, please don’t blame the components first, do some homework, analyze the situation, measure the results, improve or rectify it, before making a justified conclusion.

It takes time for the components to run-in or burn-in too before arriving at their optimum performance. Transformers have varnish impregnated in the windings. It will need time to fully dry-out to arrive at the steady state performance. 

If you find people selling their damaged equipment for spares, please keep an eye to see if they have any good quality transformers for restoration. You might be surprised that the transformers cores are still in excellent condition. You can make good quality audio gears out of them by saving on the transformer. If they’re output transformers inside, even better since it will be the most valuable transformer inside an amplifier! 

Some transformer or equipment manufacturers will design the transformer to look extremely high-tech, nice and artistic but in actual fact, the internal quality is just plain lousy. Do not be fooled. Pay attention to how they’re made (there should be signs anywhere) and you will see whether they are worthy for the price. What you pay is what you get! There is just no other ways except been plain lucky to land on a super good deal (which most of us are not, and it does not happen most of the time too, maybe once in a blue moon!). 

Nowadays, there appears to be a Z11 core that is not properly made (not from Japan?). Although they are marketed as Z11 and look like Z11 but they are not. No load tests showed that they are very lossy and the end results are far from what you get from a good quality Japanese Z11 core. 

J&K Audio Design

No comments:

Post a Comment

Search This Blog

Product Lists

Product Lists

Level 0: link 1

Level 1: link 1, link 2, link 3, link 4

Level 2: link 1, link 2, link 3, link 4, link 5, link 6, link 7, Link 8, link 9

Level 3: depends on type, size and complexity. Email us for details.

Iso-trans: link 1, link 2

Power-trans: link 1

* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.

* Our product lines are always improving and increasing. If you do not see what you want, contact us!

* Please email for volume discounts, distributor and OEM pricing.